Switching The Authorisation For Configuring Call Forwarding For Subscribers To External Numbers On/Off; Switching The Authorisation For Group Properties And Follow-Me For Subscribers On/Off - Auerswald COMpact 4000 Operation Manual

Switching the Authorisation for Configuring Call Forwarding for Subscribers to External Numbers On/Off

Switching the Authorisation for Configuring Call Forwarding for Subscribers to
External Numbers On/Off
If the subscriber should be able to forward his telephone to external numbers (subscriber call
forwarding) the authorisation for the telephone may be enabled.
Proceed as follows:
• Separately for subscribers
• Separately for configurations
• Using the configuration manager
Note: As described in the following, the setting is also possible via profiles (...
> Profiles > Configuration > Configure > ...). If the check box Profile-
controlled settings has been selected, the property set in the right-hand
column will apply. For assignment of the profile, see chapter Settings >
Profiles.
1. Open the page Subscriber (scr.) > Properties > Authorisations.
2. In the list field at the top, select the subscriber in question by his name or number.
3. Select or clear the Configuration of Scr CF to external numbers check box.
Switching the Authorisation for Group Properties and Follow-me for Subscribers
On/Off
If the configuration of Group CF / Follow me is enabled, the subscriber has the following author-
isations:
• Switching of group properties of groups which the subscriber is a member of
• Partial authorisation for Follow me
Proceed as follows:
• Separately for subscribers
• Separately for configurations
• Using the configuration manager
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Functions
Call Forwarding
453