Creating A Call Deblocker (Outgoing) - Auerswald COMpact 4000 Operation Manual

3. In the Call deblocker (outgoing) list field select one of the following options:
No: No call deblocker is used for outgoing external calls.
[Call deblocker name]: The call deblocker selected in the list field is used for
outgoing external calls.
Like subscribers: The call deblocker selected for a subscriber is used for
outgoing external calls.

Creating a Call Deblocker (Outgoing)

Ten call deblockers with a total of a maximum of 100 phone numbers/ranges can be configured
(e.g., 10 call deblockers, each with 10 phone numbers or 5 call deblockers, each with 20 phone
numbers).
Proceed as follows:
• Using the configuration manager
1. Open the page User data > Special numbers.
2. Click New.
3. Select Call Deblocker (outgoing) in the list field.
4. Enter the name of the call deblocker in the Name entry field.
5. Click Save.
6. Click Configure.
A page opens for creating phone numbers/ranges for the call deblocker in question.
7. Click New.
8. Enter the phone number/range in the Phone number / range entry field.
9. Enter the name of the corresponding phone number in the Name entry field.
10. Click Save.
11. Repeat step 7 to 10 to enter additional numbers in the call deblocker.
12. Repeat step 2 to 10 to create additional call deblockers.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Call Deblocker (Outgoing) – Released Numbers
Creating a Call Deblocker (Outgoing)
Functions
329