Isdn Connection - Auerswald COMpact 4000 Operation Manual

Settings

ISDN Connection

Expert Configuration, Analogue Connection
ISDN Connection
The existing ISDN connections can be connected to the external S
see chapter Important Information > Product Details > Basic Assembly and Extensions).
Proceed as follows for configuration:
• Configuring the connection type for the ISDN connection.
– Using the configuration manager (page Hardware > Port configuration)
• Configuring the PTMP connection and entering phone numbers.
– Using the configuration manager (page Public switched tel. networks > ISDN
connections > PTMP connection)
• Configuring the PTP connection and entering phone numbers.
– Using the configuration manager (on the following pages)
– Public switched tel. networks > ISDN connections > PBX base numbers/trunk
bundles
– Public switched tel. networks > ISDN connections > PBX base numbers/trunk
bundles > Configure
– Public switched tel. networks > ISDN connections > Extension numbers PTP
connection
• Creating a call distribution for the ISDN connection.
– Using the configuration manager (page Public switched tel. networks > Call Distri-
bution)
• If necessary, switching S0 bus monitoring on/off.
– Using the configuration manager (page Hardware > Port configuration)
• If necessary, entering additional numbers for the PTP connection.
– Using the configuration manager (page Public switched tel. networks > ISDN
connections > Additional PBX base numbers)
566
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
ports of the PBX (optional,
0