Voip Settings - Auerswald COMpact 4000 Operation Manual

The user password of the VoIP subscriber (as registration PIN or password)
STUN server (the same as in Step 6)
Size of the jitter buffer (the same as in Step 7)
Note: If the Internet connection on the PBX does not have a permanent IP
address, an account with a provider for dynamic DNS is also required
(e.g., dyndns.org). Enter the associated URL in the VoIP telephone as
registrar and domain (e.g., pbx.dyndns.org).
10. Check whether the VoIP subscriber was successfully registered on the PBX (see
Monitoring > Status internal subscriber).
11. If necessary, enable DiffServ in order to increase VoIP call quality (Quality of Service
(QoS)).

VoIP Settings

Proceed as follows:
• Using the Configuration Manager (page Administration > VoIP Configuration)
Requirements:
• VoIP channels (see Important Information > Product Details > Basic Assembly and Exten-
sions section)
DISTRIBUTION OF THE VOIP CHANNELS
Channel reserved for voicemail/fax
Number of channels to be used for voice mail/fax and not for VoIP.
External VoIP channels
Number of VoIP channels to be used as external VoIP channels. The remainder of the available
VoIP channels are used as internal VoIP channels.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Settings
VoIP
VoIP Settings
587