2. Lift the cover and remove it completely from the casing.
A Locks
Wall-Mounting the PBX
Requirements:
• Tools and material:
– Drill and screw driver
– The drilling template (see www.auerswald.de/service)
– The screws and dowels included in the scope of delivery
• Connections in the immediate vicinity of the installation site:
– Freely accessible Schuko socket
– Wall socket or NT provided by the network provider; if the wall socket/NT is relatively far
away from the PBX, permanent cabling must first be laid between the devices
– Grounding conductor (potential compensation bar of the house installation or protective
earth conductor)
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Installation and Commissioning
Preparation (COMpact 4000)
Wall-Mounting the PBX
59