Switching The Callback Option On/Off; Configuring Subscribers For The Charge Burden - Auerswald COMpact 4000 Operation Manual

Switching the Callback Option On/Off

If the callback option is enabled, the requesting subscriber can trigger a callback after initiating
an external call.
Proceed as follows:
• Using the configuration manager
Requirements:
• For executing the exchange line transfer: System telephone with configured function key
for the exchange line transfer
1. Open the page Settings > Basic settings.
2. Select or clear the Callback option check box under EXCHANGE LINE CALL
TRANSFER.

Configuring Subscribers for the Charge Burden

It must be defined which of the two subscribers should be billed the charges for a call.
Proceed as follows:
• Using the configuration manager
Requirements:
• For executing the exchange line transfer: System telephone with configured function key
for the exchange line transfer
1. Open the page Settings > Basic settings.
2. In the Charge burden list field under EXCHANGE LINE CALL TRANSFER select
one of the available options.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Functions
Exchange Line Transfer
Switching the Callback Option On/Off
303