Creating Group Filters For Service Providers - Auerswald COMpact 4000 Operation Manual

Functions
Online Name Search

Creating Group Filters for Service Providers

Proceed as follows:
• Using the configuration manager
1. Open the page Functions > Online name search > Basic settings.
2. Click New.
3. Enter a name for identification purposes in the Service provider entry field.
4. Click Save.
The service provider will be taken over into the list.
5. Click Configure in the line of the service provider in question.
6. Enter the data required for a request at the service provider (Host, HTTP method,
User name, Password, Page to be called up, Parameter).
Note:For the provider configuration, you need know-how in HTML, HTTP,
and regular expressions.
Further steps:
• Create the group filter for the service providers.
Creating Group Filters for Service Providers
A group filter specifies according to which search commands or character strings the response
of the service provider (HTML code) will be searched.
If one of these search properties is found in the response of the service provider, the response
will be modified according to the configured properties. The further search properties will be
processed accordingly and the search result will be output.
Up to five group filters can be created for each service provider. The group filter has up to ten
search properties.
Important: To create group filters, you need know-how in HTML, HTTP, and
regular expressions.
Note:
398
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016