Voice Mail/Fax Function And Memory Management; Voice Mail/Fax Function Settings - Auerswald COMpact 4000 Operation Manual

Voice Mail/Fax Function and Memory
Management
Announcements for the voice mailboxes, language files, incoming faxes and voice messages
are stored on the required USB data storage device.
Caution: Do not remove the USB data storage device while the system is
running.
• Switch off the PBX before removing the USB data storage device.
Notes:
A directory structure is created on the USB data storage device. You should
not change this structure.
The USB data storage device must have at least 50 MB free memory.

Voice Mail/Fax Function Settings

Proceed as follows:
• Using the Configuration Manager (Devices > Voice mail/fax boxes > Basic settings
page)
• Jointly for all voice mail/fax boxes
Requirements:
• Voice Mail/Fax function (optional, see Important Information > Product Details > Basic
Assembly and Extensions section)
System Information
Link to the page Administration > System messages for specifying how the system reacts to
system information.
Generate notification at
When the amount of memory used exceeds the specified level, this information is logged
and, if specified, sent as an e-mail.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016

Voice Mail/Fax Function and Memory Management

... memory utilisation
Voice Mail and Fax Boxes
Voice Mail/Fax Function Settings
213