Switching The Emergency Call Priority Switch On/Off; Switching Emergency Call Only With Exchange Line Access Number On/Off - Auerswald COMpact 4000 Operation Manual

Pbx for analogue/isdn/internet telephony
Hide thumbs Also See for COMpact 4000:
Table of Contents

Advertisement

Switching the Emergency Call Priority Switch On/Off

If the emergency call priority switch is enabled, an external line is definitely made available from
the PBX when dialling the emergency number or if an alarm is detected.
Proceed as follows:
• Using the configuration manager
1. Open the page Public switched tel. networks > Emergency calls.
2. Under EMERGENCY CALL HAS PRIORITY, select or clear the Emergency call has
priority check box.
Note: The emergency call priority switch is enabled for the entire PBX.

Switching Emergency Call Only with Exchange Line Access Number On/Off

If Emergency call only with exchange line access number is enabled, the emergency
number must be dialled with the exchange line access number entered under Public switched
tel. networks > Exchange line request (e. g. 0112 instead of only 112). In this way, numbers
beginning with 11... will remain available to be assigned as internal numbers.
If Emergency call only with exchange line access number is disabled, an emergency
number can be dialled without exchange line access number, but it is not possible to assign
internal numbers which begin with the first digits of an emergency number.
Important: Since the exchange line access number must be dialled in
advance if Emergency call only with exchange line access number is
enabled, there is a risk that the exchange line access number is forgotten in
an emergency so that no emergency call can be made.
Note: If you try to disable Emergency call only with exchange line
access number after internal numbers beginning with the first digits of an
emergency number have been entered, an error messasge will be
displayed. Solve the problem by assigning new phone numbers to the
internal subscribers in question.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Switching the Emergency Call Priority Switch On/Off
Settings
Emergency Calls
657

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents