Auerswald COMpact 4000 Operation Manual page 828

Short Reference
Call Forwarding for External Numbers
Additional information Authorisation required
Disabling Call Forwarding on No Reply (on an Internal Telephone)
## 96 Own number
Own number
Additional information Authorisation required
Enabling Time Control for the External Number (MSN) of the Dialling Telephone (on an
Internal Telephone))
## 96 # * 69 #
Additional information Permanent configuration is disabled.
Enabling Time Control for a Special Telephone Number (on an Internal Telephone)
## 96 Own number
Own number
Additional information Permanent configuration is disabled.
828
The destination number may only be an external number.
Permanent configuration is enabled.
## 61 #
Own phone number (number without exchange line access number
(unaffected by a direct exchange line telephone))
The number can be omitted if call forwarding is to be configured for
the number currently sent by the telephone.
The destination number may only be an external number.
Permanent configuration is enabled.
# * 69 #
Own phone number (number without exchange line access number
(unaffected by a direct exchange line telephone))
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016