Auerswald COMpact 4000 Operation Manual page 215

Note: The memory check may take a few minutes. The voice mail and fax
boxes cannot be accessed during the memory check. For this reason, the
memory check should be performed at a time when access to the voice mail
and fax boxes is not required (e.g. at night).
Format
The USB data storage device is formatted and the required directory tree for the voice mail and
fax function is created.
Important:
When the inserted USB data storage device is formatted, all the data
currently present on it is deleted.
After the USB data storage device has been formatted with the EXT4 file
system it can no longer be read on a Windows PC. For this reason, Windows
prompts you to format the data storage device. Under no circumstances
should you confirm this prompt by selecting "Yes".
Eject data storage device
The inserted USB data storage device is ejected. The PBX can then be shut down, and the
USB data storage device can be removed safely.
Caution: Do not remove the USB data storage device from the PBX
while the system is running.
• Switch off the PBX before removing the data storage device.
Channels Simultaneously Used for Outgoing Calls
Maximum number of call channels that can be used simultaneously for outgoing calls from the
Voice Mail/Fax function (message forwarding, fax transfer).
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Voice Mail and Fax Boxes
Voice Mail/Fax Function and Memory Management
Voice Mail/Fax Function Settings
215