Configuring The Ringer Frequency - Auerswald COMpact 4000 Operation Manual

– Public switched tel. networks > Analogue connections
– Public switched tel. networks > Voice over IP (VoIP) > Accounts
• Configuring the ringing tone for door calls.
– Using the configuration manager (page Devices > Door terminals)

• Configuring the ringer frequency.

– Using the configuration manager (page Settings > Basic settings)
Note: For internal calls and alarm calls the ringing tone is permanently set as
3 x short and Alarm.
Configuring the Ringer Frequency
The ringer frequency indicates the ringer voltage frequency signals the PBX calls to the internal
analogue subscribers.
Proceed as follows:
• Using the configuration manager
1. Open the page Settings > Basic settings.
2. In the Ringer frequency list field under General, select one of the available options.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Settings
Ringtones
Configuring the Ringer Frequency
673