Auerswald COMpact 4000 Operation Manual page 357

Functions
Ringing Sequence
Configuring Ringing Sequence
Linear - fixed - Split Group: Only the telephone of one group member will
ring. After the delay time configured under after: another single group member
will be called. The order of calls depends on the setting on the page Groups >
Properties > Basic settings under Priority. If a call was not accepted,
although all logged-in members of the group were called, the call would be
finished with a busy signal.
Linear - balancing - Split Group: Only the telephone of one group member
will ring. After the delay time configured under after: another single group
member will be called. The order of the calls depends on a priority list: First of
all the member of the group first logged-in gets the position 1 in the order of
calls, the second one the position 2, ... . If position 1 takes a call, the second
call will be assigned to position 2. The member of the group with the position 1
will get the last position in the order for a future call after he has finished the
current call. If a call was not accepted, although all logged-in members of the
group were called, the call would be finished with a busy signal.
Linear - fixed - rotating - Split Group: Only the telephone of one group
member will ring. After the delay time configured under after: another single
group member will be called. If all members of a group are called, the process
will be restarted with the first member of the group of the call order. In the first
rotation the next member of the group of the call order will be called immedi-
ately if a subscriber is busy. In the second rotation the busy subscribers will
hear knocking (only from external). The order of calls depends on the setting
on the page Groups > Properties > Basic settings under Priority.
Linear - balancing - rotating - Split Group: Only the telephone of one group
member will ring. After the delay time configured under after: another single
group member will be called. If all members of a group are called, the process
will be restarted with the first member of the group of the call order. In the first
rotation the next member of the group of the call order will be called immedi-
ately if a subscriber is busy. In the second rotation the busy subscribers will
hear knocking (only from external). The order of the calls depends on a priority
list: First of all the member of the group first logged-in gets the position 1 in the
order of calls, the second one the position 2, ... . If position 1 takes a call, the
second call will be assigned to position 2. The member of the group with the
position 1 will get the last position in the order for a future call after he has
finished the current call.
357
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016