Auerswald COMpact 4000 Operation Manual page 413

Proceed as follows:
• Separately for groups
• Separately for configurations
• Using the configuration manager
Note: As described in the following, the setting is also possible configuration-
dependent via profiles (... > Profiles > Configuration > Configure > ...). If
the check box Profile-controlled settings has been selected, the property
set in the right-hand column will apply. For assignment of the profile, see
chapter Settings > Profiles.
Requirements:
• VoIP end device which can evaluate the available information by BLF
• VoIP telephone from another manufacturer: SIP convenience package enabled (optional,
see chapter Important Information > Product Details > Basic Assembly and Extensions)
1. Open the page Groups > Properties > Settings.
2. In the list field at the top, select the group in question by its name or number.
3. Select or clear the Preliminary pick-up query and monitoring check box.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Switching Preliminary Pick-up Query and Monitoring for Groups On/Off
Preliminary Pickup Query and Monitoring
Functions
413