Configuring The Country Code - Auerswald COMpact 4000 Operation Manual

Pbx for analogue/isdn/internet telephony

Hide thumbs Also See for COMpact 4000:

Table of Contents

Proceed as follows:

• Using the configuration manager

Requirements:

• Configured prefixes (country prefix and local area code)

• Automatic exchange line request disabled

1. Open the page Public switched tel. networks > Exchange line request.

2. In the Exchange line access number entry field, change the exchange line access

number. Possible entries:

Digits in the range of

The factory setting for the exchange line access number on the PBX is 0. This

number is not effective at first because automatic exchange line request is

active in the factory settings. Changing the exchange line access number is

only meaningful if another exchange line access number is normally used

(e.g., in England).

Note that changing the exchange line access number restricts the telephone

numbering plan.