Resetting The Configuration; Regenerating The Configuration - Auerswald COMpact 5000 Operation Manual

Pbx for analogue/isdn/internet telephony

Hide thumbs Also See for COMpact 5000:

Table of Contents

Service and Maintenance

Backing Up and Recovering Configuration Data

Resetting the Configuration

When resetting the configuration, the following parameters are maintained—in contrast to a

reset to the ex-factory state via the buttons:

• Admin user name, admin PIN and admin password

• IP address settings

• Web server port setting

• NTP server settings

• Dealer/operator data

• Saved hold music and announcements

• System messages

Proceed as follows:

• Using the configuration manager

1. Open the page Administration > Data backup.

2. Click Reset under RESET CONFIGURATION.

3. Click Yes.

The configuration is reset.

4. Click OK.

When regenerating the configuration, the configuration data is read out of the PBX. The

database is reset, and the configuration data is restored to the PBX once more. This eliminates

internal errors the configuration data may contain. The configuration of the PBX remains

COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016

Compact 5000r