Auerswald COMpact 4000 Operation Manual page 239

column will apply. For assignment of the profile, see chapter Settings >
Profiles.
Requirements:
• Voice mail/fax function (optional, see chapter Important Information > Product Details >
Basic Assembly and Extensions)
• Readiness enabled
• Disabled Replacement function
• If Box announcement is selected: the corresponding announcement saved in the PBX
1. Open the page Devices > Voice mail/fax boxes > Properties > Call acceptance/
Announcement.
2. In the list field at the top, select the voice mailbox in question according to the name
or number.
3. In the Call acceptance/announcement list field under Standard behaviour, select
one of the following options:
No call acceptance: All calls not controlled via Call-specific behaviour will
not be accepted. The caller hears the call tone. (No further action is required.)
Reject call: All calls not controlled via Call-specific behaviour will not be
accepted. The caller hears the busy signal (subscriber/group will not be called
additionally) or the call tone (subscriber/group will be called). (No further action
is required.)
Standard announcement: All calls not controlled via Call-specific behaviour
will be accepted. The announcement of the selected language file will be
replayed (see Language of the announcements under Devices > Voice
mail/fax boxes > Properties > Box settings).
Box announcement: Proceed with Step 4.
4. If Box announcement is selected: In the right list field, select one of the available
options.
5. Select or clear the Recording check box under Standard behaviour to define
whether a caller can leave a message or not.
6. Enabled Recording: Select or clear the Save short messages check box under
Standard behaviour.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Configuring Call Acceptance (Standard Behaviour) for Voice Mailboxes
Voice Mail and Fax Boxes
Voice Mailbox
239