Making Exchange Line Settings For Call Through Calls - Auerswald COMpact 4000 Operation Manual

1. Open the page Functions > Call Through.
2. Enter a value in the Max. duration of an external Call Through call entry field under
EXCHANGE LINE SETTINGS. Possible entries:
1 to 99: The PBX ends an external Call Through call after 1 to 99 minutes.

Making Exchange Line Settings for Call Through Calls

You can make the following exchange line settings for Call Through calls:
• Exchange line authorisation
• Call restrictor (outgoing)
• Call deblocker (outgoing)
• Preferred exchange line
• Number presentation (outgoing)
• Number presentation (incoming)
Proceed as follows:
• Using the configuration manager
Requirements:
• For Advanced settings, Expert configuration: external numbers have been entered
• If required, configured call restrictor and deblocker
– Using the configuration manager (page User data > Special numbers)
1. Open the page Functions > Call Through.
2. Click Configure under Special exchange line settings.
3. Make the required exchange line settings.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Making Exchange Line Settings for Call Through Calls
Functions
Call Through
321