Analogue Connection; Analogue Connection Settings - Auerswald COMpact 4000 Operation Manual

Settings

Analogue Connection

Analogue Connection Settings

Analogue Connection
The existing analogue connections can be connected to the external analogue ports of the PBX
(optional, see chapter Important Information > Product Details > Basic Assembly and Exten-
sions).
Proceed as follows for configuration:
• Configuring the analogue connection and entering the phone number.
– Using the configuration manager (page Public switched tel. networks > Analogue
connections)
• Creating a call distribution for the analogue connection.
– Using the configuration manager (page Public switched tel. networks > Call Distri-
bution)
• If necessary, making country-specific modifications.
– Using the configuration manager (page Public switched tel. networks > Analogue
connections > Configure)
Analogue Connection Settings
Proceed as follows:
• Separately for analogue ports
• Using the Configuration Manager (page Public switched tel. networks > Analogue
connections > Phone numbers)
Requirements:
• External analogue port (optional, see Important Information > Product Details > Basic
Assembly and Extensions section)
Name of the analogue connection
Freely selectable name. This name is used to identify the port within the PBX.
GSM
The analogue port supports the GSM gateway connected to it. Any phone number can be
used for the analogue port. It must be entered in the PBX and GSM gateway configurations.
556
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016