Table of Contents
Advertisement
Functions, Uses, Concepts
Remote Configuration and Alternative Connection Options
Remote Configuration and Alternative
Connection Options
Aside from configuration over the internal network, there is also the option
of remote configuration via the Internet as well as configuring alternative
connection options under certain conditions.
The connected system phones can also be configured over the PBX under
certain conditions.
You can use the following connection options to configure (either remotely
or directly) the PBX and the ISDN system phones connected to it:
Configuring the PBX via the In-house Network
The PBX is usually configured via an internal network connection. The PC
you use to do this must be connected to the same network as the PBX.
Configuring the PBX Remotely via the Internet with (Auerswald)
Remote Access Server
Remote configuration of the PBX can be accessed via the page
https://
remote-access.auerswald.de
on the Internet. This requires a dealer
access via the Internet and enabling of the (Auerswald) Remote Access.
Configuring the PBX Remotely via the Internet without (Auerswald)
Remote Access Server
You can also configure the PBX remotely via an internet connection (DSL).
This requires a fixed external IP address. Alternatively, you can use VPN or
DynDNS. The router on the PBX's network must be configured accordingly.
Using the PBX (Internal) to Configure internal ISDN System Phones
You can configure internal ISDN system phones via an indirect connection
using the PBX. Before you can do this, you must install the ISDN system
58
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Advertisement
Table of Contents
