Auerswald COMpact 4000 Operation Manual page 647

Creating Call Distribution on the PTP Connection without Linear Call Distribution
For a PTP connection without linear call distribution or for extensions differing from linear call
distribution, the internal destinations must be selected.
Requirements:
• External S port, VoIP account (optional, see chapter Important Information > Product
0
Details > Basic Assembly and Extensions)
• Configured connection type PTP connection
• Entered PBX numbers
• Entered extensions and/or additional numbers
• Created internal destinations (subscribers, groups, voice mail/fax boxes or automatic
reception)
1. Open the page Public switched tel. networks > Call distribution.
If several configurations (PBX profiles) have been created, these will be available as
tabs.
2. With several configurations: Click the tab with the desired configuration.
3. In the first CALL DISTRIBUTION FOR... list field, select ISDN PTP connections or
VoIP PTP connections.
4. In the second CALL DISTRIBUTION FOR... list field, select the connection in
question.
5. In the Internal no. | name list fields, select one of the following options:
linear/fallback: The caller will be transferred to the internal number similar to
the DDI. If this phone number is not configured in the PBX, the fallback function
will be used.
Reject call: The caller hears the busy signal.
Internal number: The caller will be transferred to the selected internal number
(subscriber, group, voice mail/fax box or automatic reception).
Note: External numbers, e.g., those used as remote switching/programming
numbers or call through numbers, may not be used in the call distribution.
6. Click Save.
7. Repeat step 4 to 6 to configure the call distribution for the other PTP connections.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Settings
Call Distribution
Creating a Call Distribution
647