Initiating Intercom Announcement/Hands-Free; Switching Intercom Permission On/Off - Auerswald COMpact 4000 Operation Manual

Initiating InterCom Announcement/Hands-Free

Proceed as follows:
• Using a character string on the internal telephone
• Using the menu/function key on a system telephone (optional, see the telephone manual)
Requirements:
• Enabled InterCom authorisation at the InterCom destination
1. Pick up the receiver.
2. Dial one of the following character strings:
##011: Initiates an InterCom announcement.
##012: Initiates InterCom hands-free.
3. Enter the internal number of the system telephone. Possible entries:
Internal number of the individual system telephone
request type Direct exchange line telephone: with preceding **)
The system telephone automatically takes the call after a single ring.

Switching InterCom Permission On/Off

If InterCom permission is enabled, InterCom announcement or InterCom hands-free calling is
enabled on the InterCom destination in question.
Proceed as follows:
• Separately for subscribers (system telephones)
• Using the configuration manager
• Using the menu/function key on a system telephone (optional, see the telephone manual)
Requirements:
• System telephone that supports InterCom (optional, see telephone manual)
1. Open the following page:
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
InterCom Announcement/Hands-Free
Initiating InterCom Announcement/Hands-Free
(for exchange line
Functions
347