Transferring; Options For Transferring A Call - Auerswald COMpact 4000 Operation Manual

Transferring

A call partner can be transferred (connected) to an internal or external subscriber.

Options for Transferring a Call

During an existing call, the following options are available for transferring a call:
Transferring with Announcement
In order to transfer a call, first initiate a query call, announce the call and then connect both
communication partners.
Transferring without Announcement
If you want to transfer an external communication partner to another internal subscriber, you
do not have to wait until the subscriber being called via the query call accepts the call; you can
hang up the receiver while this call is being made. The internal subscriber will continue to be
called.
Placing External Communication Partner in Waiting Loop
If the internal subscriber to which you want to transfer an external communication partner is
busy, you can place the external communication partner in the waiting loop of this subscriber.
Calling a Third Subscriber and Transferring to an Active Communication Partner
Assuming that you have gained an additional communication partner from a call, e. g. from
accepting a call signaled by call waiting, and this second communication partner want to be
transferred now to somebody else. You can now initiate a third call that connects the second
and third communication partners with each other and then continue telephoning with your first
communication partner.
Additional Options
– Parking the Call Internally (page 390)
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Telephoning
Transferring
Options for Transferring a Call
145