E-Mail; Configuring Outgoing Mail Server - Auerswald COMpact 4000 Operation Manual

Settings

E-mail

Configuring Outgoing Mail Server

E-mail
The PBX supports the following e-mail functions:
• System e-mails
• Forwarding of voicemail and fax messages
The settings described here must be made centrally in the PBX and can then be freely
assigned to the individual e-mail functions of the PBX.
Configuring Outgoing Mail Server
You can configure up to four outgoing mail servers in the PBX. They can be freely assigned to
the individual e-mail functions of the PBX (system e-mails, forwarding of voicemail and fax
messages).
An outgoing mail server is responsible for the transfer of e-mails. You will receive the access
data for the outgoing mail server to be used from your Internet service provider, for example.
Proceed as follows:
• Using the configuration manager
1. Open the page Administration > E-mail > Outgoing mail server.
2. Only for outgoing mail servers 2 to 4: Click
3. Enter a name for the outgoing mail server in the Name entry field.
Further steps:
• Enter the access data for the outgoing mail server which you have received from the
Internet service provider.
• Enter the address of the e-mail sender for the outgoing mail server.
626
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
New.