Ptp Connection Settings - Auerswald COMpact 4000 Operation Manual

Settings
ISDN Connection

PTP Connection Settings

PTP Connection Settings
Proceed as follows:
• Separately for PBX base numbers
• Using the Configuration Manager (page Public switched tel. networks > ISDN connec-
tions > PBX base numbers/trunk bundles > Configure)
Requirements:
• Configured PBX base number
NETWORK PROVIDER
Exchange line has emergency call ability
Requirements:
• The corresponding connection must allow emergency calls
This exchange line can be used for emergency calls.
This exchange line cannot be used for emergency calls. When you attempt to dial an
emergency number, you will hear the announcement, "This telephone does not allow
emergency calls. Please use an alternative."
Note: If you have updated your firmware from Version 6.4 to 6.6, the
telephone allows emergency calls by default.
CCBS
Requirements:
• Service feature CCNR (callback on no response) is enabled by the network provider.
• Configured prefixes (country prefix and local area code)
The PBX offers the callback option to an external caller if the connection they dialled is busy.
Important:
If this function is enabled, but the network provider does not support it
(service feature not unlocked), it might still happen that the caller is given the
option of a callback. In this case, the caller's reply is not forwarded to the PBX
and therefore the function cannot be performed.
574
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016