Auerswald COMpact 4000 Operation Manual page 199

Call Type
This column contains additional information to the recorded calls. The following types of call
are available (in case of differences, the standard names are also listed in parentheses):
Alarm call
Alarm call confirmed (Alarm confirm.)
Alarm call rerouted (Alarm rerout.)
• Alarm settings: Call Forwarding internal (an emergency call is forwarded by an internal
alarm subscriber - alarm subscriber has CF to internal destination number)
• Call Forwarding: Call Forwarding external (an emergency call is forwarded by an external
alarm subscriber - alarm subscriber has CF to external destination number)
Exchange line access via manually switched exchange line access (exch.trf.): Exchange
line call transfer
Call Through (CallThru)
Remote programming (remote prog): PBX configuration via CAPI
Standard calls (normal)
Door->external calls (Door-Ext.)
Call Forwarding internal (CF int.)
Call Forwarding via exchange line (CF ext.): Forwarding via external connection
VoIP call (VoIP)
Note: An outgoing external call made via Voice over IP by a Call Through
user, is recorded as a Call Through call.
Wake-up calls (Wake-up)
Project (Proj.)
Business calls may be started with project numbers if the call charges or times have to be
assigned to project bills. These project numbers are stored for a successful call in the call data
memory and visible in this column.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Address Books and Lists
Call Data
Columns on the Call Data List
199