Table of Contents
Advertisement
Service and Maintenance
Replacing the Power Supply Cable
Shutting the PBX Down
7. Insert the connector of new power supply cable into the socket of the power supply
so that the cable is directed toward the side of the casing.
8. Guide the cable out of the casing using the strain relief bracket.
9. Reattach the holding bracket.
10. Reconnect the power supply to the COMpact 4000 Interface board.
11. Plug in the power plug.
The PBX restarts.
748
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
- Quick Links:
- Configuration and Administration
Hide quick links:
Advertisement
Table of Contents
