Switching The Automatic Updating Of The Pbx Time On/Off Via The Network - Auerswald COMpact 4000 Operation Manual

Settings
PBX Time

Switching the Automatic Updating of the PBX Time On/Off via the Network

Date in the format DD . MM . YYYY
5. In the Time zone list field, select one of the following options, depending on the
location:
UTC: The UTC (Coordinated Universal Time - world time) is a combination of
the International Atomic Time (TAI) and Universal Time (UT). It is used instead
to Greenwich Mean Time (GMT).
Location name, e.g., Berlin
6. Click Set now.
Using the Configuration Manager to Accept the PBX Time from the PC
1. Open the page Settings > Date/Time of the PBX.
2. Select the option Take from PC under ONE-TIME CONFIGURATION OF DATE /
TIME.
3. In the Time zone list field under ONE-TIME CONFIGURATION OF DATE / TIME,
select one of the following options, depending on the location:
UTC: The UTC (Coordinated Universal Time - world time) is a combination of
the International Atomic Time (TAI) and Universal Time (UT). It is used instead
to Greenwich Mean Time (GMT).
Location name, e.g., Berlin
4. Click Set now.
Switching the Automatic Updating of the PBX Time On/Off via the Network
If updating the PBX time via the network is enabled, the PBX time will be accepted from an NTP
server at the selected time interval.
Proceed as follows:
• Using the configuration manager
662
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016