Auerswald COMpact 4000 Operation Manual page 826

Short Reference
Call Forwarding for External Numbers
Own number
Additional information Authorisation required
Configuring Call Forwarding on Busy (on an Internal Telephone)
## 96 Own number
Own number
Destination number
Additional information Authorisation required
Enabling Call Forwarding on Busy without Re-entering the Number (on an Internal
Telephone)
## 96 Own number
Own number
Additional information Authorisation required
826
Own phone number (number without exchange line access number
(unaffected by a direct exchange line telephone))
The number can be omitted if call forwarding is to be configured for
the number currently sent by the telephone.
The destination number may only be an external number.
Permanent configuration is enabled.
# * 67 * Destination number
Own phone number (number without exchange line access number
(unaffected by a direct exchange line telephone))
The 1st number can be omitted if call forwarding is to be configured
for the number currently sent by the telephone.
Internal or external number to be called
Internal number of the group or subscriber (for exchange line request
type Direct exchange line telephone: with preceding **)
or
External number (for exchange line request type Internal telephone:
with preceding exchange line access number)
Authorisation for external destination required
The destination number may only be an external number.
Permanent configuration is enabled.
# * 67 #
Own phone number (number without exchange line access number
(unaffected by a direct exchange line telephone))
The number can be omitted if call forwarding is to be configured for
the number currently sent by the telephone.
The destination number may only be an external number.
Permanent configuration is enabled.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
#