Using A Filter; Creating Filters - Auerswald COMpact 4000 Operation Manual

Address Books and Lists
Call Data

Using a Filter

Using a Filter
Using the filter can be carried out as follows:
• Using the configuration manager
1. Open the following page:
• For admin: User data > Call data > Call data list
• For user: Call data list.
2. In the SELECTED FILTER list field, select one of the available options.
Note: On the page User data > Call data > Filter you can also create user-
defined filters which can then be selected here.

Creating Filters

A filter prescribes the criteria after which the call data will be filtered.
Proceed as follows:
• Using the configuration manager
1. Open the following page:
• For admin: User data > Call data > Filter
• For user: Filter.
2. Click New.
3. Enter the desired name in the Filter name entry field.
4. In the Based on list field, select a template from all filters created so far.
5. Click Save.
200
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016