Configuring The Maximum Duration Of Transferred Calls (External To External) - Auerswald COMpact 4000 Operation Manual

column will apply. For assignment of the profile, see chapter Settings >
Profiles.
Requirements:
• Exchange line authorisation assigned to the subscriber for external calls
or National)
1. Open the page Subscriber (scr.) > Properties > Authorisations.
2. In the list field at the top, select the subscriber in question by his name or number.
3. Select or clear the Transfer of external calls externally check box.

Configuring the Maximum Duration of Transferred Calls (External to External)

The maximum duration of transferred calls (external to external) indicates how many minutes
a connected call between two external subscribers may last at most.
Proceed as follows:
• Using the configuration manager
1. Open the page Settings > Basic settings.
2. Enter a value in the Max. duration of switched calls: external with external entry
field under GENERAL. Possible entries:
1 to 99: The PBX ends the transferred call after 1 to 99 minutes.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Configuring the Maximum Duration of Transferred Calls (External to External)
Settings
Transfer and Callback
(International
691