Initiating An Instant Firmware Update Via The Update Server; Configuring Regular Firmware Updates For The Connected Comfortel System Telephones Via The Update Server - Auerswald COMpact 4000 Operation Manual

Further steps:
• In order to use new features after a firmware update, you normally need a new version of
the Operation Guide. This is available on the Internet (see www.auerswald.de/service).

Initiating an Instant Firmware Update via the Update Server

Proceed as follows:
• Using the configuration manager
Requirements:
• PBX connected to broadband Internet access
• Configured address of the update server
• Configured DNS server and, if necessary, an HTTP proxy server
• Configured gateway
1. Open the page Administration > Firmware update/restart.
2. Select or clear the PBX firmware update check box under Instant firmware update.
3. Select or clear the ISDN COMfortel firmware update check box under Instant
firmware update (firmware update for all connected ISDN COMfortel system
telephones).
4. Click Update.
Further steps:
• After a firmware update you usually require a new version of the instructions. You will find
up-to-date instructions on the Internet (see www.auerswald.de/service).
Configuring Regular Firmware Updates for the Connected COMfortel System
Telephones via the Update Server
Proceed as follows:
• Using the configuration manager
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Initiating an Instant Firmware Update via the Update Server
Service and Maintenance
Firmware Update
705