Call Deblocker (Incoming) - Vip Numbers; Switching The Call Deblocker (Incoming) On/Off - Auerswald COMpact 4000 Operation Manual

Call Deblocker (Incoming) – VIP Numbers
If you would still like to allow specific people to call you despite enabling the do-not-disturb
function, the external numbers of these people can be assigned a call deblocker for incoming
calls in the PBX. The call deblocker which applies to all subscribers can be enabled on your
own telephone as needed.

Switching the Call Deblocker (Incoming) On/Off

If a call deblocker is enabled, the do-not-disturb function does not apply to callers who use one
of the phone numbers entered in the call deblocker.
Proceed as follows:
• Separately for subscribers
• Separately for configurations
• Using the configuration manager
• Using a character string on the internal telephone (see section Short Reference)
• Using the menu/function key on a system telephone (optional, see the telephone manual)
Note: As described in the following, the setting is also possible via profiles (...
> Profiles > Configuration > Configure > ...). If the check box Profile-
controlled settings has been selected, the property set in the right-hand
column will apply. For assignment of the profile, see chapter Settings >
Profiles.
Requirements:
• Configured call deblocker
1. Open the following page:
• For admin: Subscriber (scr.) > Properties > Reachability
• For user: Subscriber Properties > Reachability.
2. In the list field at the top, select the subscriber in question by his name or number.
3. Select or clear the Call deblocker (incoming) check box.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Call Deblocker (Incoming) – VIP Numbers
Switching the Call Deblocker (Incoming) On/Off
Functions
331