Auerswald COMpact 4000 Operation Manual page 723

The Connection routes dialogue appears with the devices connected via the
configured interface.
7. If necessary, double-click the PBX symbol to display all the connected system
telephones. Select the telephone whose configuration you want to open and click OK.
The PIN entry dialogue appears.
8. Select the desired authorisation from the Authorisation level list field.
9. Enter the associated PIN in the PIN entry field and click OK.
The configuration is loaded from the telephone. This may take a while.
10. Make the desired changes.
Once you have configured all the changes to your satisfaction, first save the configu-
ration as described in the following as a file on a data storage device (PC) and then
in the telephone.
11. Open the menu File > Save.
12. Click File.
13. Select the directory in which you want to save the configuration file.
14. Enter a name for the *.cf2 file and click Save (this text is dependent on the operating
system used).
15. Open the menu File > Save.
16. Click Telephone.
The Connection routes dialogue appears with the devices connected via the
configured interface.
17. Select the telephone on which you want to save the configuration and click OK.
The PIN entry dialogue appears.
18. Enter the associated PIN in the PIN entry field and click OK.
The configuration is saved on the telephone. This may take a while.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Remote Configuration and Alternative Connection Options
Configuring ISDN System Telephones via the PBX (Internal)
Service and Maintenance
723