Accepting The Call Waiting Call; Disconnecting The Current Call And Accepting The Call Waiting Call - Auerswald COMpact 4000 Operation Manual

Telephoning
Call Waiting Calls

Accepting the Call Waiting Call

Note:
You can also use this function on analogue telephones, where it can be
performed via the T-Net function key/menu (optional, see manual for the
telephone).
On ISDN and system phones, this function is performed via an existing
function key or via the menu (optional, see manual for the telephone).
Accepting the Call Waiting Call
If a call waiting call is signaled, proceed as follows:
1. Press the Flash key or the Query key.
2. Dial 2.
You are connected with the caller. Your previous communication partner hears the
hold music.
Note:
You can also use this function on analogue telephones, where it can be
performed via the T-Net function key/menu (optional, see manual for the
telephone).
On ISDN and system phones, this function is performed via an existing
function key or via the menu (optional, see manual for the telephone).
If the waiting call is an alarm call, the currently existing call will be terminated
when accepting the waiting alarm call.

Disconnecting the Current Call and Accepting the Call Waiting Call

If a call waiting call is signaled, proceed as follows:
1. Press the Flash key or the Query key.
2. Dial 1.
You are connected with the caller. Your previous call has been terminated.
126
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016