Internal Telephone Numbers; Possible Types Of Internal Telephone Numbers - Auerswald COMpact 4000 Operation Manual

Settings

Internal Telephone Numbers

Possible Types of Internal Telephone Numbers

Internal Telephone Numbers
Internal numbers must be configured for the internal ports so that the connected end devices
are accessible. Each connected end device receives a subscriber number.
If multiple internal end devices need to be accessible via a phone number, a common group for
the internal subscribers must first be configured.
Internal telephone are also needed to make e. g. connections to devices, voip accounts or
functions.
Note: It is a good idea to create a telephone numbering plan for the internal
numbers before allocation and then use the following steps to transmit this to
the PBX.
Possible Types of Internal Telephone Numbers
Internal numbers are taken from the internal numbering plan. Possible types:
• Up to 112 phone numbers for subscribers
• Up to 64 phone numbers for groups
• Up to 20 phone numbers for voice mailboxes
• Up to 20 phone numbers for fax boxes
• Up to 100 Exchange line access numbers (account numbers) for VoIP accounts
• Up to 16 phone numbers for alarms
• Up to 8 phone numbers for door terminals
• Up to 8 phone numbers for the audio outputs (Audio Out)
• Up to 10 automatic receptions
• 1 Basis phone number for call parking
• Up to 400 short-code dialling numbers
• Up to 10 emergency call or service numbers
538
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016