Installation - Auerswald COMpact 4000 Operation Manual

Important Information
Product Details

Installation

USB Host Port 2.0
The USB host port is suitable for connecting to one of the following devices:
• USB memory stick
• USB printer
Door terminal
The PBX can only be extended with door terminals by connecting the corresponding acces-
sories. See Ethernet port and internal analogue port.
Relay/Actuator
The PBX can only be extended with relays/actuators by connecting the corresponding acces-
sories. See Ethernet port and internal analogue port.
Switch Input
The PBX can only be extended with switch inputs by connecting the corresponding acces-
sories. See Ethernet port and internal analogue port.
Announcement Output
The PBX can only be extended with announcement outputs by connecting the corresponding
accessories. See Ethernet port and internal analogue port.
Installation
The PBX is intended to be operated in closed rooms. In addition, all of the devices connected
to the system must be located inside the building.
The PBX enables you to connect some devices directly, inasmuch as they are close enough to
the PBX. The distance depends on the length of the equipment connection cables up to a
maximum of 10 m.
If no suitable connection sockets are available or are too far away, you must lay the installation
cable permanently.
40
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016