Auerswald COMpact 4000 Operation Manual page 619

Pbx for analogue/isdn/internet telephony
Hide thumbs Also See for COMpact 4000:
Table of Contents

Advertisement

Despite this, it can be possible to make outgoing calls if the steps in the STUN request
and Outbound proxy areas were successful. However, since no phone number has
been entered in the provider's registrar, no calls can arrive over this account (the
account is not accessible).
• The domain has been set incorrectly for the VoIP provider in Public switched tel.
networks > Voice over IP (VoIP) > Provider > Configuration.
• The account data has been entered incorrectly, e.g. due to a misspelling, or the data has
been assigned to the wrong provider. Here you need to check the User name, the Password
and the Authorisation ID (if specified), in particular (Public switched tel. networks > Voice
over IP (VoIP) > Accounts > Configuration).
• The PBX was rebooted more quickly than specified in the time limit for registration. See
Public switched tel. networks > Voice over IP (VoIP) > Provider > Configuration.
This leads to multiple registrations that the VoIP provider may block after a while.
Outbound proxy
The VoIP provider has responded to the INVITE request in some way.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Settings
VoIP
Monitoring VoIP Status
619

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents