Auerswald COMpact 4000 Operation Manual page 37

Important: Note that many standard VoIP end devices can only use the
functions of the PBX to a very limited extent.
For various audio, switching and door functions several accessories can be connected to the
PBX via a switch/router.
The PBX supports the following IP switch relays from other manufacturers:
• NETIO 230B
• WebRelay (identical to Keil)
• Energenie EG-PM2-Lan
• Philips hue
The PBX supports the following IP door terminals from other manufacturers:
• Series 20 IP from Telecom Behnke
• SIP door terminal Maxi from Baudisch
• TCS FBI 6101
• ELCOM LBM-300
For configuration/administration, the PBX can be connected to a separate PC or to a local
network (LAN).
For a CTI solution (LAN-TAPI), the PBX can be connected to a local network (CTI server and
CTI clients). This requires CTI software, e. g. PBX Call Assist. Alternatively, we recommend the
following software manufacturers:
• ESTOS (www.estos.de), supports Windows 7 and Windows 8
• ilink (direct.ilink.de), supports Mac OS X version 10.4, or later
The following telephones connected to the PBX are supported by the LAN-TAPI:
• COMfortel 1200 IP standard telephones
• COMfortel 1400 IP/2600 IP/3600 IP system telephones
• COMfortel 3200/3500 system telephones
• COMfortel 1200/1400 system telephones
• COMfortel 1600/2600 system telephones
• ISDN telephones
• Analogue telephones
• Standard VoIP telephones (SIP)
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Important Information
Product Details
Basic Assembly and Extensions
37