System Message Settings - Auerswald COMpact 4000 Operation Manual

Settings
System Messages

System Message Settings

System Message Settings
Proceed as follows:
• Using the Configuration Manager (page Administration > System messages)
Requirements:
• configured outgoing mail server
– Using the Configuration Manager (page Administration > E-mail > Outgoing Mail
Server)
• configured DNS server
– Using the Configuration Manager (page Administration > IP Configuration)
TRANSFER OF SYSTEM E-MAILS
Outgoing mail server
Select the outgoing mail server that will be used to send system e-mails.
Default: System e-mails are sent by the default outgoing mail server.
Send e-mail in HTML format
System e-mails are sent in HTML format.
System e-mails are sent in text format.
Language file
Select the language file whose text modules are to be used for system e-mails.
URL format for hyperlinks
Select the format for the link in system e-mails to the system message overview on the
Monitoring > System messages page.
with IPv4 address: Link starts with https: and the PBX's IPv4 address.
with IPv6 address: Link starts with https: and the PBX's IPv6 address (if present).
User-defined: A URL prefix defined by the user is set.
640
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016