Creating Isdn Subscribers - Auerswald COMpact 4000 Operation Manual

Note: The name is used for display purposes on the system telephone.
Furthermore, on some pages in the configuration manager (e.g., call data
list), the name is displayed in addition to the phone number.
5. In the Module / Port list fields, select the module and the port to which the end device
is connected.
6. In the Device type list field, select one of the following options depending on the
device connected:
Telephone: Analogue telephone, analogue modem
Answering machine: Analogue answering machine
Fax machine: Analogue fax machine
Note: The PBX automatically detects the dialling type of the analogue
extension.
7. Click Save.
8. Repeat step 2 to 7 to enter additional numbers.
Further steps:
• If required, change the automatically generated PINs and passwords (see chapter Settings
> Protection from Unauthorised Access > Configuring User PINs and Passwords).

Creating ISDN Subscribers

The ISDN subscribers are on the end devices for which internal numbers are allocated and that
are connected to the internal S
via the PBX.
Note:
It is a good idea to not connect more than two devices on the S
to allow separate calling on either of the two B-channels.
The internal number entered here needs to be entered in the ISDN unit or in
the system telephone as the (first) MSN. Also on an ISDN unit, make sure
that the phone number is transmitted to the PBX.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
port. The phone numbers are used to access the end devices
0
Settings
Internal Telephone Numbers
Creating ISDN Subscribers
port in order
0
541