Auerswald COMpact 4000 Operation Manual page 222

Voice Mail and Fax Boxes
Voice Mailbox
Creating Voice Mailboxes
4. In the from entry field, enter the lowest phone number of the number range. Possible
entries:
2 to 4 digits in the range of
5. In the until entry field, enter the highest phone number of the number range. Possible
entries:
2 to 4 digits in the range of
Note:
Double allocation of a number is not possible.
Using phone numbers with few digits (two or three-digit numbers) inevitably
restricts the possible supply of phone numbers requiring more digits. For
example, if the phone number 12 is assigned, the phone numbers 120-129
and 1200-1299 will no longer be available.
The default exchange line access number on the PBX is 0 in the factory
settings; however, this can be changed. Note that changing the exchange line
access number restricts the telephone numbering plan.
6. If required, enter a name for identification purposes in the Name entry field.
Note: The name is shown on further pages of the configuration in addition to
the phone number.
7. From the Owner list field, select the first internal number (subscriber, group) to which
you want to assign the box.
222
10 to 9999
10 to 9999
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016