Expert Configuration, Analogue Connection - Auerswald COMpact 4000 Operation Manual

Settings
Analogue Connection

Expert Configuration, Analogue Connection

Note: If you have updated your firmware from Version 6.4 to 6.6, the
telephone allows emergency calls by default.
Number
The analogue connection has a phone number. The phone number is assigned by the provider
for the connection.
Name
Freely selectable name. This name is used to identify the phone number within the PBX.
Ringtone
The ringtone specifies which sequence of sounds is used to signal external calls to internal
subscribers on the PBX.
Note: See the Settings > Ring tones section for information about exceptions
to signalling and sound sequences.
Expert Configuration, Analogue Connection
Proceed as follows:
• Separately for analogue ports
• Using the Configuration Manager (page Public switched tel. networks > Analogue
connections > Phone numbers > Configure)
Requirements:
• External analogue port (optional, see Important Information > Product Details > Basic
Assembly and Extensions section)
Apply country settings for
Accepts the country settings for the selected country.
558
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016