Configuring Maximum Credit For Call Allowance Accounts - Auerswald COMpact 4000 Operation Manual

Functions
Call Allowance Account

Configuring Maximum Credit for Call Allowance Accounts

Important: If using an analogue exchange line or a VoIP account for external
calls, the call allowance account doesn't work.
• The AOCD service attribute released by the network provider (charge transmission during
the connection)
• Soft LCR configured
• Tariff table set up
1. Open the page Functions > Call allowance accounts.
2. Click Set allowance amount.
3. Enter the desired amount in the on ... EUR entry field.
4. Select the check boxes of the subscribers in question to set their allowance charge
amount or select the check box at the bottom to select all subscribers for charging.
5. Click Save.
Note: You cannot set an allowance charge amount if Unlimited allowance
under Charge according the following pattern is selected.
Configuring Maximum Credit for Call Allowance Accounts
The maximum credit for call allowance accounts displays the highest amount that a call
allowance account may not exceed.
Proceed as follows:
• Using the configuration manager
Requirements:
• External S port (optional, see chapter Important Information > Product Details > Basic
0
Assembly and Extensions)
Important: If using an analogue exchange line or a VoIP account for external
calls, the call allowance account doesn't work.
338
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016