Shutting Down And Switching Off; Shutting The Pbx Down - Auerswald COMpact 4000 Operation Manual

Service and Maintenance

Shutting Down and Switching Off

Shutting the PBX Down

Shutting Down and Switching Off
If it is necessary to separate the PBX from the electric current (pull the power plug of the PBX
out of the socket and also of the accessory equipment where required), the PBX will first have
to be powered down properly.
Shutting the PBX Down
Important: When shutting down the PBX, all of the connections to the web
server, all calls and all data services are terminated. Unsaved data is lost.
There are two variants to power down the PBX:
• Delayed powering down: The PBX is powered down only after all calls are finished.
• Immediate powering down: The PBX is powered down immediately. All connected call will
be disconnected.
Proceed as follows:
• Using the configuration manager
1. Open the page Administration > Firmware update/restart.
2. In the list field under RESET OF THE PBX (RESTART), select one of the available
options.
3. Click Power down under POWER DOWN OF THE PBX.
The PBX is powered down.
Further steps:
• As soon as the Power LED is red, you can pull the power plug of the PBX and accessory
equipment – if required – out of the socket.
746
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016