Auerswald COMpact 4000 Operation Manual page 63

Caution: Electrostatic charges can destroy sensitive components.
• Discharge electrostatic charges from yourself before touching the circuit
Important:
Before you insert a COMpact 2BRI module, first make the necessary
settings on the module (operating modes and terminators).
Inserting a Module
1. Slide the module into the board guides with the component side pointing to the left.
2. Press the module upward until the board lock clicks into place.
Removing a Module
1. Unlatch the board lock, for example with your right thumb.
2. Remove the module by pulling it downward with your other hand.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
boards with your hands or any tools. To do this, touch a (preferably
earthed) metal object, such as the PBX's earthing terminal or a computer
case.
Installation and Commissioning
Preparation (COMpact 4000)
Updating or Upgrading the PBX
63