Call Restrictor (Incoming) - Robinson Numbers; Switching The Call Restrictor (Incoming) On/Off For Subscribers - Auerswald COMpact 4000 Operation Manual

Call Restrictor (Incoming) – Robinson Numbers
If there are certain persons who you absolutely do not want to call you or if you do not want
callers to call an extension, their external numbers and/or all anonymous callers can be
assigned to a call restrictor for incoming calls. The call restrictor which applies to all subscribers
can be enabled on your own telephone as needed.

Switching the Call Restrictor (Incoming) On/Off for Subscribers

If a call restrictor is enabled, a caller, who transmitted one of the phone numbers entered in the
call restrictor or no number, is rejected.
Proceed as follows:
• Separately for subscribers
• Separately for configurations
• Using the configuration manager
• Using a character string on the internal telephone (see section Short Reference)
• Using the menu/function key on a system telephone (optional, see the telephone manual)
Note: As described in the following, the setting is also possible via profiles (...
> Profiles > Configuration > Configure > ...). If the check box Profile-
controlled settings has been selected, the property set in the right-hand
column will apply. For assignment of the profile, see chapter Settings >
Profiles.
Requirements:
• Configured call restrictor
1. Open the following page:
• For admin: Subscriber (scr.) > Properties > Reachability
• For user: Subscriber Properties > Reachability.
2. In the list field at the top, select the subscriber in question by his name or number.
3. Select or clear the Call restrictor (incoming) check box.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Call Restrictor (Incoming) – Robinson Numbers
Switching the Call Restrictor (Incoming) On/Off for Subscribers
Functions
469