Auerswald COMpact 4000 Operation Manual page 313

Destination Number
DTMF destination number
x
Specifies the in-house destination to which the PBX should automatically transfer calls after the
caller inputs a DTMF suffix dialling digit 0 to 9.
Possible entries:
Internal number of a subscriber
Internal number of a group
Internal number of a voice mailbox
Internal number of another automatic reception
* under DTMF 1- 9: All internal numbers for subscribers, groups, voice mailboxes and
automatic receptions that start with a number marked with * can be selected directly by
redialling.
Notes:
If the caller enters
mailboxes and automatic receptions whose phone numbers start with 4
(4xxx) can be reached by directly redialling their phone number.
If the caller enters *: The subscriber is given a maximum of 10 seconds in
which to enter each digit. If this time period is exceeded, or if they dial an
invalid phone number (subscriber, group, automatic reception), the
announcement if the destination is busy/does not reply is played, and the
caller will be automatically connected with the automatic reception they called
previously.
Note that an internal subscriber or a group must have at least Only
incoming, with emergency call (no VoIP) exchange line authorisation to
enable them to answer a call transferred by the automatic reception.
An external destination number can be reached by entering an internal desti-
nation which is forwarded to an external one (e.g. via call forwarding
(subscribers or groups) with the required external phone number as desti-
nation number).
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
* e.g. for DTMF 4: All internal subscribers, groups, voice
Functions
Automatic Reception
Settings for Automatic Receptions
313