Auerswald COMpact 4000 Operation Manual page 219

Pbx for analogue/isdn/internet telephony
Hide thumbs Also See for COMpact 4000:
Table of Contents

Advertisement

3. In the Box type list field, select the Voice mailbox option.
4. In the from entry field, enter the lowest phone number of the number range. Possible
entries:
2 to 4 digits in the range of
5. In the until entry field, enter the highest phone number of the number range. Possible
entries:
2 to 4 digits in the range of
Note:
Double allocation of a number is not possible.
Using phone numbers with few digits (two or three-digit numbers) inevitably
restricts the possible supply of phone numbers requiring more digits. For
example, if the phone number 12 is assigned, the phone numbers 120-129
and 1200-1299 will no longer be available.
The default exchange line access number on the PBX is 0 in the factory
settings; however, this can be changed. Note that changing the exchange line
access number restricts the telephone numbering plan.
6. If required, enter a name for identification purposes in the Name entry field.
Note: The name is shown on further pages of the configuration in addition to
the phone number.
7. From the Owner list field, select the internal number (subscriber, group) to which you
want to assign the boxes.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
10
to
9999
10
to
9999
Voice Mail and Fax Boxes
Voice Mailbox
Creating Voice Mailboxes
219

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents