Auerswald COMpact 4000 Operation Manual page 399

If several group filters have been created, the sequence of application of
these filters can be determined (priority).
A group filter will only be processed if the application of group filters with a
higher priority has not been successful.
Proceed as follows:
• Using the configuration manager
Requirements:
• Created service provider
1. Open the page Functions > Online name search > Basic settings.
2. Click Configure in the line of the service provider in question.
3. Click New.
4. Enter a name for identification purposes in the Group filter entry field (e. g. a search
command).
5. Click Save.
The group filter will be taken over into the list.
6. Click Configure in the line of the group filter in question.
7. Click New.
8. Enter a search command (regular expression) or the character string you want to
search for into the Search property entry field.
9. In the Mode list field, select one of the following options:
Use Match: The response of the server (HTML code) will be filtered according
to the search property and only the search result will be further processed.
Delete Match: The response of the server (HTML code) will be filtered
according to the search property and the search result will be deleted. Only the
rest will be further processed.
Replace Match: The response of the server (HTML code) will be filtered
according to the search property and the search result will be replaced by the
substitute text. The modified response will then be further processed
completely.
10. Select or clear the Line Mode check box.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Online Name Search
Creating Group Filters for Service Providers
Functions
399